Ip packet processing, Traps, A-12 – Paradyne Hotwire Routers User Manual

Page 62

Command Line Interface

A-12

6371-A2-GB20-10

August 2000

IP Packet Processing

IP multicast

{

enable | disable

}

Enables or disables the forwarding of IP multicast packets. This setting is retained
across power cycles.

Minimum access level: Administrator

enable – Enable forwarding of IP multicast packets.

disable – Disable forwarding of IP multicast packets. Default = disable.

IP processing

{

enable | disable

}

Enables or disables the processing of IP packets in the service domain. This setting is
retained across power cycles.

Minimum access level: Administrator

enable – Enable processing of IP packets. Default = enable.

disable – Disable processing of IP packets.

Traps

trap {disable | enable}

name of trap

Use this command to enable or disable traps. Default = disable.

Minimum access level: Administrator/Config

Name of Traps:

all

authen fail

ccn

devfail

link up

link down

selftest

test start

test stop

warmstart

For additional information, refer to Appendix C,