beautypg.com

Diagnostics and troubleshooting, Diagnostics and troubleshooting overview, Device restart – Paradyne Hotwire Routers User Manual

Page 45: Alarms inquiry, Chapter 6

background image

6-1

6371-A2-GB20-10

August 2000

Diagnostics and Troubleshooting

6

Diagnostics and Troubleshooting Overview

There are several features available to assist in evaluating the Hotwire DSL
Router. The following sections are covered in this chapter:

H

Device Restart

H

Alarms Inquiry

H

System Log

H

Ping

H

TraceRoute

Device Restart

The DSL router can be restarted locally or remotely. From the Command Line
Interface, type

Restart

and press Enter.

The DSL router reinitializes itself, performing a power-on self-test and resetting
the local System Log (SYSLOG).

Alarms Inquiry

show alarms

This command allows the operator to display the list of current alarm conditions, if any.

Minimum access level: Operator

The possible output lines are:

Alarm: Management Address Conflict

Alarm: Failed Selftest

Alarm: System Error

No alarm condition is set

Alarm condition reverts to Normal when the offending problem has been corrected.