Pentax Optio Digital Camera 750Z - Manual (Page 80)

78
4
Tak
ing Pi
cture
s
1
Press the 3 button.
The [
A
Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [3D Mode].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select [Parallel] or [Cross].
You can view both [Parallel] and [Cross] pictures without the image
viewer.
To view pictures with the 3D image viewer (optional), select [Parallel].
5
Press the shutter release button halfway.
The 3D Mode setting is saved and the screen returns to capture status.
Refer to Step 6 of “How to Use the Menus” (p.43) for other operations
after the setting has been made.
How to Take and View 3D Pictures
As our eyes are positioned about 6 cm (2.4 in.) or 7 cm (2.8 in.) apart,
there is a very slight deviation between what we see with our right eye
and what we see with our left eye. The difference is processed by our
brain to produce a three-dimensional image. This principle is applied to
taking and viewing 3D pictures.
A three-dimensional effect will not be achieved if the subject moves
before the second image is taken. When taking a 3D picture of a person,
ask your subject to stay as still as possible, and then take the second
picture as quickly as you can. It is easier to take the picture if you use a
tripod or appropriate base.
Selecting the Viewing Mode
1
2, 3, 4
5
Flash Exp. Comp.
A u t o B r a c k e t
I n t e r v a l S h o o t
P a r a l l e l
M o v i e
3 D M o d e
D i g i t a l Z o o m
C r o s s
R e c . M o d e
MENU C a n c e l
0 . 0
OK O K