Pentax Optio Digital Camera 750Z - Manual (Page 188)

186
10
Appen
d
ix
Messages such as the following may appear on the LCD monitor when
using the PictBridge function.
Stop interval
shooting? This message appears when you turn on the camera
during interval shooting standby.
Interval Shooting is
completed
This message appears when interval shooting is
canceled or before the camera automatically turns
off after taking the set number of pictures.
Deleting This message appears when deleting an image.
Camera cannot
display this image
You are trying to play back an image in a format not
supported by this camera. You may be able to play
it back on another brand of camera or your
computer.
Image folder could
not be created
The largest file number has been assigned to an
image in the largest folder number and no more
images can be saved. Insert a new SD Memory Card
or format the SD Memory Card. (p.150)
Image protected
The image or sound file you are trying to delete is
protected.
Data being recorded
This message appears when you try to switch to
Movie mode or Playback mode while an image is still
being recorded, or when the protect setting or DPOF
setting is being changed. It disappears after the
image is recorded or the setting is changed.
Data being processed
This message appears when the camera takes more
than five seconds to display an image due to, for
example, image processing.
Alarm was set
This message appears when the alarm is set and
before the camera automatically turns off.
No paper in a printer There is no paper in the printer.
No ink in a printer
There is no ink in the printer.
Printer error An error message has been sent from the printer.
Data error
A data error message has been sent from the
printer.
Paper stuck in a
printer
The paper is stuck in the printer.