Pentax Optio Digital Camera 750Z - Manual (Page 66)

64
4
Tak
ing Pi
cture
s
3
Press the 4 button while the
setting is displayed.
The Auto bracketing options screen
appears.
4
Use the four-way controller (23)
to choose the shooting
conditions.
5
Press the four-way controller (5) for Auto Bracket
settings a or b.
A pull-down menu appears.
6
Use the four-way controller (23) to choose the
bracketing steps.
7
Press the 4 button.
The camera is ready to take pictures.
The function chosen for auto bracketing
appears on the LCD monitor.
8
Press the shutter release button
halfway.
The focus frame turns green if the subject is
in focus.
9
Press the shutter release button fully
• Three pictures are taken in succession when a is selected and
the shutter release button is pressed down fully in Step 9.
• Only one picture is taken when any other auto bracketing option is
selected and the shutter release button is pressed down fully in
Step 9, and the camera creates a series of three shots internally.
• Auto bracketing cannot be used with ^ in F, G, C and d
modes, or when digital filter is set to SOFT.
• Auto bracketing cannot be used when the quality level is set to
TIFF. Also, in Auto Bracket mode, the TIFF quality level cannot be
selected. (1p.93)
E x p o s u r e
A u t o B r a c k e t
MENU C a n c e l
0 . 3 E V
OK O K
W h i t e B a l a n c e 1
S h a r p n e s s
S a t u r a t i o n
C o n t r a s t
3 8 3 8 3 8
1 4 1 4 : 2 5 : 2 5 1 4 : 2 5
0 9 / 2 5 / 2 0 0 4 0 9 / 2 5 / 2 0 0 4 0 9 / 2 5 / 2 0 0 4