Pentax Optio Digital Camera 750Z - Manual (Page 78)

76
4
Tak
ing Pi
cture
s
4
Move the camera to the right and
take the second image.
Move the camera until the half-transparent
image and the actual view overlap and
press the shutter release button. Repeat
Steps 3 and 4 to take the third and
subsequent images.
5
Press the { button.
The screen returns to Step 2.
To cancel Panorama assist mode, set the mode dial to any mode other
than F.
• The camera cannot join the images. Use the panorama software
supplied with the camera (ACDSee for PENTAX, ACD
photostitcher). Refer to the “PC Guide - Enjoying Your Digital
Camera Images On Your PC” for instructions on stitching images.
• In Panorama Assist mode, the image is saved as C (JPEG)
even when the quality level is set to TIFF.