Pentax Optio Digital Camera 750Z - Manual (Page 109)

107
4
Tak
ing Pi
cture
s
Saving the Settings (Memory)
You can choose whether you want the set values to be saved when the
camera is turned off or returned to the defaults. The items that can be
saved or reset are listed below. If you select O (On), the settings will be
saved in the status they were in immediately before the camera was
turned off. If you select P (Off), the settings will be reset to the defaults
when the camera is turned off. Items not listed here will also be saved in
the selected settings when the camera is turned off.
Item Description
Default
Setting
Flash The flash mode set with the b button (1p.87) O
Flash Exp.
Comp. The [Flash Exp. Comp.] setting on the [A Rec. Mode]
menu (1p.89)
P
White Balance
The [White Balance] setting on the [A Rec. Mode] menu
(1p.95)
P
EV
Compensation The EV compensation value set with the front lever
(1p.59)
P
Digital Zoom
The [Digital Zoom] setting on the [A Rec. Mode] menu
(1p.58)
O
AE Metering
The [AE Metering] setting on the [A Rec. Mode] menu
(1p.100)
P
Sensitivity
The [Sensitivity] setting on the [A Rec. Mode] menu
(1p.101)
P
Focus Mode The focus mode set with the ) button (1p.84) P
Zoom Position
The optical zoom position set with the Zoom button
(1p.57)
P
MF Position
The manual focus position set with the ) button
(1p.85)
P
DISPLAY The LCD monitor display mode (1p.81, 121) P
File #
The file number is saved. If a new SD Memory Card is
inserted when On has been selected, file numbers are
assigned sequentially.
O
Drive Mode The drive mode set with the ( button (1pp.60 - 73) P
The zoom position setting in the digital zoom range will not be saved
even if [Zoom Position] is set to On in [Memory].