Printronix L5035 - Manual (Page 76)

Chapter 3 Printer Configuration
76
No Back Feed
No Back Feed automatically disables (default) or enables back
feeds.
Mode Menu
NOTE: The order and number of options displayed in this menu
structure varies depending on the emulations that are
installed.
“Mode” refers to the emulation software that you use. Your printer
comes equipped with the Printronix LinePrinter Plus emulation
software (which emulates an impact printer). The IGP/PGL, IGP/
VGL, IPDS, and PhoenixPage PCL5 software emulations are
available as options.
When you turn on the printer, it reads the Flash memory as part of
its initialization, to determine what emulations are installed.
Based on this information, the printer then creates the appropriate
selections on the Mode menu. During power-up, the printer also
loads the power-up set of configuration values. The power-up set is
the same as the factory set until you save a new set to the power-
up configuration.
Mode
LinePrinter +
A
PCL5 IGP/PGL IGP/VGL
B C D
See also the following documents:
A. LinePrinter Plus Emulation for LaserLine Printers Programmer’s Reference Manual
B. PhoenixPage PCL5 Emulation Operator’s Guide
C. IGP/PGL Emulation for LaserLine Printers Programmer’s Reference Manual
D. IGP/VGL Emulation for LaserLine Printers Programmer’s Reference Manual
E. IPDS Emulation for LaserLine Printers Programmer’s Reference Manual
IPDS
E