Printronix L5035 - Manual (Page 30)

Chapter 2 Loading Paper
30
Loading Paper
The following section explains how to load fanfold paper. To load
cut sheet paper, go to page 33.
Loading Fanfold Paper
When loading fanfold paper, be sure the leading edge of the
paper has a clean, separated perforation (without ragged
edges or paper chaff).
NOTE: You do not need to power off the printer power to replace
paper. If you leave the printer on and replace the paper it
will resume printing where it left off when you put it on line.
To load fanfold paper, do the following steps. Repeat this
procedure whenever top-of-form must be reset (e.g., after clearing
a paper jam, loading new paper, etc.). For details on clearing paper
jams, refer to Chapter 6, “Troubleshooting.”
1. If your printer has the optional power paper stacker installed,
set the stacker page length adjustment on the side of the power
stacker to match the paper length to be used.
2. Place the fanfold paper box under the tractor unit with the first
paper fold toward the printer.