Printronix L5035 - Manual (Page 174)

Chapter 5 General Cleaning
174
6. Position the main charger with the charger grid up and the front
end of the charger toward you, as shown in the figure below.
Refer to the figure below and the inset drawing in the figure,
and remove the charger grid from the main charger as follows:
a. While pressing the front retaining tab toward the rear of the
charger, unhook the rear end of the charger grid from the
rear retaining tab.
b. Release the front retaining tab, then remove the charger
grid from it.
Legend:
1) Front Retaining Tab (Inset Drawing)
2) Charger Grid
3) Front Retaining Tab
4) Main Charger
5) Rear Retaining Tab
1
2
3
4
5