Printronix L5035 - Manual (Page 224)

Chapter 6 System Status And Error Messages
224
TABLE NOTES:
1. For any error with Reprint on Fault enabled: If the printer stops
while in the middle of printing a page, reloading the paper and
reprinting are required. There may be other cases requiring
reloading and reprinting; if so, a message will appear.
2. For any error with Reprint on Fault disabled: If the printer stops
while in the middle of printing a page, reloading the paper is
required and pages are lost.
3. For error numbers 01, 14, and 15: If the error occurs while
paper is not moving, it is
not necessary to reload or reprint.
4. For error number 02: If the error is caused by a paper-empty at
the lower sensor (Paper Near End Sensor), it is not necessary
to reprint.
5. Status message only. No operator action required to clear
message