Printronix L5035 - Manual (Page 110)

Chapter 3 The CNVT2FLS Utility Program
110
The CNVT2FLS Utility Program
The CNVT2FLS program is a DOS utility that is supplied with the
flash software on diskette. This utility converts logo, form, TIFF,
setup, and font files into downloadable format.
To convert files into downloadable format, do the following:
1. Create a directory on the hard drive and copy the CNVT2FLS
utility to that directory.
2. Copy all of the files to be converted to the directory where the
CNVT2FLS utility resides.
3. Change to the drive and directory where the CNVT2FLS utility
resides.
4. To display a brief help message, at the DOS prompt, enter the
command name
CNVT2FLS with no parameters:
CNVT2FLS
You will then see a help message similar to the following:
USAGE:
CNVT2FLS file_name1 file_name2 file_name3 A
or
CNVT2FLS file_name1 file_name2 file_name3 A FONT
file_name1: Input file name to be converted from.
file_name2: Output file name for file download.
file_name3: Flash file name to be stored in file system after download.
hw_type: Specify A all the time.
FONT: Optional, specify FONT if this is a font file.