Kodak 500 - Manual (Page 39)

3-26 A-61628 December 2011
11. The default for SSL is to not use SSL. If your email server requires
Secure Socket Layer (SSL), check Use SSL.
12. Select Use StartTLS if you want to enable a secure SMTP
connection.
NOTE: Make sure your mail server is configured to use
STARTTLS. If it is not, the Scan Station will fail to send an
E-mail.
13. When your SMTP connection is configured, select Test Connection
to test whether your settings are correct.
The Configuration Organizer will test your settings and display a
“Success” or “Failed” message. If the test connection failed, verify
that all of your settings are correct and make any necessary
changes, until a Success message is displayed.
14. After running the test connection, click OK on the message box to
return to the SMTP Settings screen; then click Done to return to the
E-mail screen.