Kodak 500 - Manual (Page 126)

A-61628 December 2011 6-9
On the defined day of the week and time, the Scan Station checks for
the specified folder on the network, and if found, examines the contents
of the folder looking for an administrative KSS500.XML file and an
optional KSS500UPDATE.EXE file. If the KSS500.XML file and/or the
KSS500UPDATE.EXE file is found, the modification date and time will
be compared to the last time a configuration was executed on the Scan
Station. If the KSS500.XML file and/or the KSS500UPDATE.EXE file is
more current, the configuration settings and/or new firmware update in
the file are applied to the Scan Station. Be sure to carefully select a
time of day when the Scan Station will be idle for automatic
updates.
NOTE: You can obtain update packages from the Kodak website or
from your Kodak service representative. Update packages will
always be a KSS500UPDATE.EXE file.
Method 3 Refer to Chapter 3, “Uploading configuration settings using a USB
drive” for more information and procedures regarding Method 3.
Method 4 This method requires an update package and an administrative
configuration file to be copied to a USB drive. When the USB drive is
inserted into the Scan Station and recognized, if the update package is
a different version than the currently installed version, you will be
prompted to update the Scan Station firmware. Both the old version
number and the version number of the update package will be
displayed. If you decide to update the firmware, all the data found in the
update package will be copied to the Scan Station and installed. When
the installation is complete, click OK or remove the USB drive and the
Scan Station will automatically be restarted.
If the Scan Station does not automatically restart, press the power
button on the front of the Scan Station and select Restart. The Scan
Station will shutdown in a normal manner. This is important because
proper update and configuration occurs when the Scan Station is being
shut down.
NOTE: You can obtain update packages from the Kodak website or
from your Kodak service representative. Update packages will
always be a KSS500UPDATE.EXE file.