Kodak 500 - Manual (Page 115)

5-30 A-61628 December 2011
Connecting to a network
printer that is directly
connected to the network This option requires the printer to be shared by a PC (at least
temporarily) on the network, while the printer drivers are downloaded
and installed on the Scan Station.
Before setting up a printer that is directly connected to the network, the
printer must first be “shared” from a computer on the network. The
shared printer must also be configured to provide a Windows XP driver
for the printer. Once shared, you need the driver name and port name
from this computer.
On the PC that is sharing the printer:
1. Click Start>Settings>Printers and Faxes and select the installed
printer.
2. Right-click on the installed printer and select Properties. The
Properties window will be displayed.
3. Write down the Driver Name. The location of this information may
be different for each printer.