Kodak 500 - Manual (Page 32)

A-61628 December 2011 3-19
Language setting The language you select will be used to configure the Scan Station’s
user interface.
1. Select the Language icon.
2. Select the desired language.
Device settings Clicking the Device icon displays a list of settings which will be used to
configure the Scan Station to work on your office network.
• The Scan Station is configured with a unique device name at the
factory. It is highly recommended that you do not change the default
name: “OEMXXXXXX”.
• If the device name has been changed from the factory default name
using the KSS500 - Scanner Admin application, this name will be
sent to the Scan Station.
• If you change the device name using the Configuration Organizer,
this name will be sent to the Scan Station when using a USB flash
drive to administer the Scan Station.
• Your device name must be unique on your network.