Kodak 500 - Manual (Page 131)

A-61628 December 2011 7-1
7 Maintenance
Contents Opening the Scan Station cover ..................................................... 7-1
Cleaning procedures....................................................................... 7-2
Cleaning the rollers ................................................................... 7-2
Cleaning the separation module................................................. 7-3
Cleaning the feed module .......................................................... 7-4
Vacuuming the Scan Station ...................................................... 7-6
Cleaning the imaging area ......................................................... 7-6
Running a transport cleaning sheet............................................ 7-7
Replacement procedures ............................................................... 7-8
Replacing the separation module and tires ................................ 7-8
Replacing the pre-separation pad ............................................ 7-10
Replacing the feed module and tires ........................................ 7-11
Adjusting the pre-separation roller tension ................................... 7-14
Replacing the USB connector....................................................... 7-15
Supplies and consumables .......................................................... 7-16
Opening the Scan
Station cover 1. Before opening the Scan Station cover, be sure the output tray
cover is lowered.
2. Press and hold the Scan Station cover release lever and pull the
Scan Station cover open.
3. When you finish cleaning the Scan Station or replacing a part, close
the Scan Station cover with both hands.