Kodak 500 - Manual (Page 12)

A-61628 December 2011 2-3
Email Server Settings — found under the Settings button in the Configuration Organizer or
Scan Station when using the KSS500 - Scanner Admin application.
Parameter Name Description/Sample Your Setting Notes
SMTP Settings
• Server Address Fully qualified domain name or
IPv4 address of the SMTP server
(e.g., smtp-server.
company.com or 192.0.0.1). Use IPv4 to eliminate any DNS issues
when troubleshooting.
• Credentials User name, password and network
domain. Required to access the
SMTP server. Required for authenticated SMTP.
NOTE: This is not necessarily the
same as the credentials defined
under Device Settings.
• Port Default: 25 Only change if your email server
communicates on an IP port that is
not Port 25.
• TSL Transport Layer Security
• SSL Secure Socket Layer Typically unchecked. Check only if
you are sure your email server
requires it.
• Authentication
Scheme
The specific SMTP Authentication
Scheme used by your mail server. Contact your corporate LAN
administrator for more details on this
setting.
LDAP Settings
• Server Address Fully qualified domain name or
IPv4 address of the LDAP server
(e.g., ldap-server.
company.com or 192.0.0.1). Use IPv4 to eliminate any DNS issues
when troubleshooting.
• Credentials User name, password and network
domain. Required to access the
LDAP server. Required for authenticated LDAP.
NOTE: This is not necessarily the
same as the credentials defined
under Device Settings.
• Port Default: 389 Only change if your LDAP server
communicates on an IP port that is
not Port 389.
• Base DN Base Distinguished Name
Contact your corporate LAN
administrator for more details on this
setting.
• Search Field Tag Default: sn
• Email Address Tag Default: email
• Full Name Field Tag Default: display name
• Search Results to
Return
The maximum number of records
to display (1 to 1000) when
performing a search.
Default: 50
• Security Options Allows you to set the Security Type
and/or Certificate.