Basic operations, Check mode and proof copy (continued) – Kyocera copier User Manual
Page 99

Basic Operations 6-37
Basic Operations
Check Mode and Proof Copy (continued)
1 Touch the desired copying condition key on the Check Screen to highlight it. The
dimmed
CHANGE SETTING
key will become clear.
NOTES: • Any key that cannot be highlighted indicates that the copying condition cannot be changed from the
Check Screen.
• Although the following application functions can be highlighted, they cannot be changed because
the CHANGE SETTING key will be kept dimmed: Overlay, Non-image area erase, Reverse image,
AUTO layout.
2 Touch
CHANGE SETTING
. The LCD will display an appropriate screen to change the
copying condition selected.
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting Enhance key will display the Change Enhance Selection Screen.
• Selecting Non STD Size key will display the Non STD Size Setting Screen.
• Selecting an application function key will display the Change Application Selection
Screen.
3 Change the setting as desired, then restore the Check Screen to return to the
checking steps, or to the Basic Screen to start copying.
Check Screen
To release the settings:
1 Touch the desired original scanning condition key or application function key on the
Check Screen to highlight it. The dimmed
RELEASE SETTING
key will be clear.
2 Touch
RELEASE SETTING
.
3 Touch
YES
to cancel the application function, or
NO
to restore.
When
YES
is touched, the selected function will be released and the key will disappear
from the Check Screen.