Kyocera copier - Manual (Page 287)

16-2 Machine Specifications
Specifications
Specifications Subject To Change Without Notice
Configuration Console with stationary platen
Photoreceptor OPC drum
Method Laser Electrostatic
Toner Black, cartridge type
Recommended Operating Environment 50°~86°F (10°~30°C); 10~80% RH
Warm Up Approx. 6 min. @68°(20°C); 50% RH
Auto Reset Off/30 sec./1 min./1.5 min./2 min./2.5 min./3
min./3.5 min./4 min./4.5 min./5 min.
First Copy Out Time From Platen Glass:
3.9 sec. for 8.5"x11"
Copy Rate 75 cpm: 8.5"x11", 5.5"x8.5"
62 cpm: 8.5"x11"R
51 cpm: 8.5"x14"
43 cpm: 11"x17"
Continuous Copy 1~9,999 copies
Voltage 230V AC14 to 10.6%
Current 20A Dedicated line recommended
Frequency 50Hz/60Hz
Grounding Isolation recommended
Termination NEMA Type 6-20R receptacle
(250V, 2-pole, 3-wire, grounded)
Power Consumption Max. 3,119 VA (full option)
Noise Level (full system) Approx. 78 dB (A) or less, during copying
Automatic Modes AMS; AES (plus 9-level manual density);
APS detects 11"x17", 8.5"x14", 8.5"x11"R,
8.5"x11", 5.5"x8.5"