Kyocera copier - Manual (Page 113)

7-8 Output Modes
Output Modes
Staple-Sort Mode Using Primary (Main) Tray (continued)
2 Touch OUTPUT APPLI. on the Basic Screen to display the Finisher Mode Selection
Screen.
3 Touch the desired key among the eight keys on the screen to select the staple
position.
4 Touch OK on the Finisher Mode Selection Screen to complete the setting and return to
the Basic Screen.
The selection made in stapling position will be displayed in the OUTPUT icon area.
5 Select additional copying features, as required.
6 Enter the desired print quantity.
7 Position originals in the document feeder. When using Store mode, see p. 6-28 to p.
6-30.
8 Press [ START ].
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while
the paper is exiting; otherwise mishandled paper will occur.