Kyocera copier - Manual (Page 109)

7-4 Output Modes
Output Modes
Non-Sort Mode Using Primary (Main) Tray
The Non-sort mode simply means that the offset-stacker finisher modes are not
selected. Copies will be stacked upon exit without being offset by sorted sets.
With the Primary (main) tray initially selected on the Output Mode Screen, 2 Paper Tray/
3 Paper Tray outputs the printed sheets FACE DOWN in the proper order.
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
3,000 sheets 8.5"x11", 8.5"x11"R
1,500 sheets 11"x17", 8.5"x14"
1 Touch SORT on the Basic Screen to deselect it, if highlighted.
2 Enter the desired print quantity.
3 Position original(s) in the document feeder or on the platen glass, and make copying
selections, as required.
4 Press [ START ] to begin copying in Non-sort mode.
Copies will exit face down, with the page heading toward the front of the copier.
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while
the paper is exiting; otherwise mishandled paper will occur.
Basic Screen
1
2
3
1
2
3