Kyocera copier - Manual (Page 107)

7-2 Output Modes
Output Modes
2 Paper Tray/3 Paper Tray Finisher Specifications
Use only paper that is recommended by us and stored under the environmental
conditions stated for copy quality. Special stock is not guaranteed for reliability or copy
quality. Multi-sheet bypass tray, Interrupt, and Transparency interleaving are
incompatible with finisher use.
This Finisher also accommodates wide paper sizes in addition to the standard sizes
described below. See p. 4-9 ~ p. 4-10.
Finisher Type
❒ Primary (Main) Tray with built-in 2 stapling: moving tray type
Secondary (Sub) Tray
Booklet Tray
Cover Sheet Feeder (option)
Primary (Main) Tray
• Non-Sort Mode
❒ Paper size: 11"x17"~5.5"x8.5"
❒ Paper weight: 16~24 lb; Special stock (65 lb (176 g/m 2 cover paper), transparency film, labels, hole
punch, rag content)
❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
3,000 sheets 8.5"x11", 8.5"x11"R
1,500 sheets 11"x17", 8.5"x14"
• Sort Mode/Group Mode
❒ Paper size: 11"x17"~5.5"x8.5"
❒ Paper weight: 16~24 lb
❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
3,000 sheets 8.5"x11", 8.5"x11"R
1,500 sheets 11"x17", 8.5"x14"
• Staple-Sort Mode
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11"
❒ Paper weight: 16~24 lb
❒ Paper capacity for 20 lb: 1,000 sheets* 1
❒ Staple capacity: 50 sheets* 2 (5.0mm thick or less)
❒ Staple position: See p. 7-7.
NOTES:
*1: Variable according to the number of pages to be stapled. See p. 4-9 for detail.
*2: Staple sheet capacity is changeable, and may be set to 45, 40 or 35 by service.