Applications, Stamp/overlay (continued) – Kyocera copier User Manual
Page 184
Applications 9-41
Applications
Stamp/Overlay (continued)
1 Touch
APPLI.
on the Basic Screen to display the Application Selection Screen.
2 Touch
Stamp/Overlay
. The Stamp/Overlay Selection Screen will be displayed.
3 Touch to select the desired stamp to display the subsequent screen.
On each screen, you can specify the desired type of the selected stamp.
4 When selecting STAMP, SET NUMBERING, PAGE NUMBERING, or DATE/TIME,
select the desired position from 9 location keys on each screen.
If fine adjustment is required, touch
FINE ADJ. OF POSITION
to display the Fine
Adjustment Setting Screen.
Touch
UP SIDE
,
RIGHT SIDE
,
DOWN SIDE
, or
LEFT SIDE
to specify the direction, then
use the touch screen keypad or up/down arrow key to enter the desired amount.
Fine Adjustment Setting Screen
5 Touch
CHARACTER SIZE
, if desired, to change the character size. The following
options are provided:
STAMP
: LARGER/ SMALLER
SET NUMBERING
: 20pt/ 36pt
PAGE NUMBERING : 8pt/ 10pt/ 12pt/ 14pt
DATE/TIME
: 8pt/ 10pt/ 12pt/ 14pt
6 Touch
PRINTED PAGE
on the Stamp Selection, Set Numbering Type Selection, or
Date/Time Type Selection Screen to designate whether to print the selected stamp on
the cover only or on all pages.
Touch
PRINTED PAGE
on the Page Numbering Type Selection Screen to designate
whether to print the page numbers on all pages, except the front cover, or except the
front/back covers.
7 Touch
STARTING No.
on the Set Numbering, Page Numbering, or Watermark
Numbering Type Selection Screen to display the Starting No. Setting Screen (see
above). Use the touch screen keypad or up/down arrow key to enter the desired
starting number, then touch
OK
to return to the previous screen.
8 When selecting WATERMARK or WATERMARK NUMBERING, touch
LIGHT
,
NORMAL
,
DARK
, or
DARK+
to select the desired density level on each screen.
9 The Overlay function will be selected simply by touching
OVERLAY
to highlight it.
10When all the desired selections are made, touch
OK
to return to the Application
Selection Screen.
Starting No. Setting Screen