Kyocera copier - Manual (Page 65)

Basic Operations 6-3
Basic Operations
How to Make a Basic Copy (continued)
The Basic Screen (continued)
1 Position the original document in the document feeder or on the platen glass.
2 Press [
START ] to start copying with initial settings; or make other selections, then
press [ START ].
Basic Copy Settings
Copy mode : see p. 6-4 ~ p. 6-6
Copy density : see p. 6-7 ~ p. 6-9
Lens mode : see p. 6-10 ~ p. 6-16
Copy size : see p. 6-17 ~ p. 6-21
Reserve : see p. 6-22 ~ p. 6-27
Other Basic Copying Operations
Memory copy
Platen store mode : see p. 6-28 ~ p. 6-29
RADF store mode : see p. 6-30
Rotation : see p. 6-31 ~ p. 6-34
Check mode and Proof copy : see p. 6-35 ~ p. 6-37
Interrupt mode : see p. 6-38 ~ p. 6-39
Help mode : see p. 6-40 ~ p. 6-41
Using the Multi-sheet bypass tray : see p. 6-42 ~ p. 6-43
Output Mode with Finisher : see the Section 7.
Special Original Mode : see the Section 8.
Application Selections : see the Section 9.
Server Function : see the Section 11.
NOTE: If the Basic Screen displays ADJUSTMENT MODE in the message area, this means that the machine
was left in the service adjustment mode by a technician. If this occurs, please contact the technician
and request that the mode be turned off; otherwise copying may be adversely affected.