Kyocera copier - Manual (Page 147)

9-4 Applications
Applications
Sheet/Cover Insertion (continued)
Insertion Mode
This mode is classified as Copy insertion and Blank insertion. The Copy insertion mode
copies and inserts plain or colored sheets at locations designated in the page setting
area of the Sheet/Cover Insertion Screen. The Blank insertion mode inserts non copied
(plain or colored) sheets.
The tray source for insertions can be selected and displayed on the Sheet/Cover
Insertion Screen.
Front Cover Mode
This mode is classified as Front copy and Front blank. The Front copy mode copies and
inserts a plain or colored sheet into the finished set, as a Front cover. The Front blank
mode inserts a non copied plain or colored sheet into the finished set, as a Front cover.
When either Front copy or Front blank is selected, the corresponding icon will appear on
the upper-left corner key in the page setting area of the Sheet/Cover Insertion Screen.
The tray source will be the same as that for back cover, and can be selected and
displayed on the Sheet/Cover Insertion Screen.
Back Cover Mode
This mode is classified as Back copy and Back blank. The Back copy mode copies and
inserts a plain or colored sheet into the finished set, as a Back cover. The Back blank
mode inserts a non copied plain or colored sheet into the finished set, as a Back cover.
When either Back copy or Back blank is selected, its icon will appear as the last (fixed)
key, with one active blank key preceding it in the page setting area of the Sheet/Cover
Insertion Screen.
The tray source will be the same as that for front cover, and can be selected and
displayed on the Sheet/Cover Insertion Screen.
The insertion type can be selected separately for front cover, back cover, and insertion
sheets. This allows multiple combinations, such as blank front cover and copied
insertions. See the following illustration for details.