Kyocera copier - Manual (Page 140)

Special Original 8-9
Special Original
Special Original (continued)
Mixed Original (continued)
1 Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original Screen.
2 Touch Mixed Original .
3 Select additional copying features, as desired.
4 Touch
OK to complete the setting and to return to the Basic Screen.
5 Select APS mode to copy each original size to a matching copy size in 1:1 mode; or
select AMS mode to copy all originals to the same paper size, with a ratio selected
automatically.
APS is automatically selected.
To select AMS, touch the tray key on the Basic Screen to select the desired copy size.
6 Enter the desired print quantity.
7 Position mixed originals FACE UP in the document feeder; 11"x17", 8.5"x14", 8.5"x11"
and 5.5"x8.5" mixed, or 8.5"x14", 8.5"x11"R, 8.5"x11" and 5.5"x8.5" mixed.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.
Option: Press [CHECK] to view the selection, and make the Proof copy, if desired; then touch EXIT to
return to the Basic Screen. See p. 6-35 to p. 6-37.
8 Press [ START ].
After copying is completed, press [ AUTO RESET ] to release the mode and reset the
machine.
Mixed size originals APS mode
Mixed size originals AMS mode