Kyocera copier - Manual (Page 45)

4-2 Paper Information
Paper Information
Positioning Originals on the Platen Glass
Positioning an Original for Manual Copying
Use the platen glass when originals are not suitable for use with the document feeder,
e.g., when size is incompatible, or when originals are folded, stapled, torn, or in
generally poor condition.
Specifications
❒ Max. original size: 11"x17" (280mmx432mm), sheet or book
❒ Max. book weight/thickness: 15 lb [6.8kg]/1.2" [30mm]
❒ Original placement: Face down on right depth side of glass
1 Raise the document cover, as shown in the illustration below.
2 Place original FACE DOWN in the right rear corner, aligning the edge with the right
measuring guide.
3 Gently close the document cover, to prevent the original from shifting on the glass.
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while
the paper is exiting; otherwise mishandled paper will occur.
TIP:
To eliminate black copy marks on edges when copying from a book without selecting Book Copy mode,
select Frame/Fold Erasure or Non-Image Area Erase in Application mode.