Kyocera copier - Manual (Page 203)

Server Function 11-11
Server Function
Image Recall Mode (continued)
1 Press [ MODE ] to light up the [ SCANNER/SERVER ] LED. The Scanner/Server Setting
Menu Screen will be displayed.
2 Touch IMAGE RECALL to display the Image Data Password Entry Selection Screen.
3 Enter your Image data password from the touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct password.
4 If the password is correct, touch OK to display the Recall Job Selection Screen.
5 Touch the desired job name key to highlight it, then touch a to move it to the recall list
on the right side. Touching JOB CHECK displays the Check Screen to allow you to
view all the feature selections made for that job.
NOTE: Only one job at a time can be removed from the recall list. To cancel the job moved to the list, touch
b to return the job to the left side key, then select again to recall the desired job.
If the desired job name is displayed in the recall list, touch OK . The Image Data
Recalling Screen will be displayed to show the current status of transmission.
6 When the data transmission is completed, the Basic Screen will be displayed
reflecting the settings made for that job.
NOTE: To suspend recall, touch CANCEL on the Image Data Recalling Screen, then touch YES on the
popup menu to delete the data recalled to DIMM; or touch NO to continue. The data stored in HDD
will not be erased by this operation.
7 Press [ START ] to print.