Kyocera copier - Manual (Page 260)

Key Operator Mode 13-47
Key Operator Mode
Side 2 Lens Adjustment [16]
Use this function to set the adjustment data of the magnification ratio for each tray as
Side 2.
Key Operator Mode Screen 2 Side 2 Lens Adjustment Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
2 To display menus [11] to [18] of the Key Operator Mode Screen, touch Lower
arrow key.
3 Touch [16] Side 2 lens adjustment to display the Side 2 Lens Adjustment Screen.
4 Touch to highlight the desired tray key, then touch arrow keys to select an adjustment
data.
The selected data will be displayed on the highlighted tray key.
5 Touch OK to complete the setting and return to the Key Operator Mode Screen.
6 If other key operator settings are required, select the desired item, from [1] to [18].
7 If no further changes are required, touch
PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.