Applications, Auto layout (continued) – Kyocera copier User Manual
Page 175
9-32 Applications
Applications
AUTO Layout (continued)
1 Touch
APPLI.
on the Basic Screen to display the Application Selection Screen.
2 Touch
AUTO Layout
. The incompatible function keys will be dimmed to show inactivity.
3 Select additional copying features, as desired. When using RADF to scan originals,
touch
Non-image Area Erase
to deselect it.
4 Touch
OK
to complete the setting and return to the Basic Screen.
5 Select the desired copy size.
6 Enter the desired print quantity.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
IMPORTANT: DO NOT CLOSE THE DOCUMENT FEEDER WHEN USING PLATEN GLASS.
PLACING ORIGINAL OBLIQUELY ON THE PLATEN GLASS MAY CAUSE BLACK COPY
MARKS.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.
Option: Press [CHECK] to view the selection, and make a Proof copy if desired; then touch EXIT to return
to the Basic Screen. See p. 6-35 to p. 6-37.
8 Press [
START
].
After copying is completed, touch
AUTO Layout
on the Application Selection Screen or
press [
AUTO RESET
] to release the mode and reset the machine.