Basic operations, Interrupt mode (continued) – Kyocera copier User Manual

Page 101

Basic Operations 6-39

Basic Operations

Interrupt Mode (continued)

2 Remove any document from the platen glass or from the document feeder, if present.
3 Place new original(s) on the platen glass or in the document feeder.
4 The copying settings in Interrupt mode are as follows.

Copy Mode

: 1

RADF

: ON

AES

: ON

Lens Mode

: 1:1 (1.00)

APS

: ON

Print Quantity

: 1

Finisher

: ON

Select other copying features that are compatible with the Interrupt mode, if desired.

5 Press [

START

6 When Interrupt copying is completed, press [

INTERRUPT

] again to return to the

settings of the initial job.

7 Replace the initial original, then press [

START

] to resume copying.

NOTES:

1 In Reserve mode, pressing [INTERRUPT] before the copier finishes scanning originals of the

reserve job will clear the settings selected for reserve job.

2 When [CHECK] is pressed during Interrupt Copying, the information displayed reflects the initial

copy job settings. Check mode will not display Interrupt copy job information.