Kyocera copier - Manual (Page 217)

13-4 Key Operator Mode
Key Operator Mode
Function Menu Map
FUNCTION MENU SUB FUNCTION MENU AND SETTING OPTIONS
[1] System initial setting [1] Date&Time setting: [Present time; Setting time; Summer time]
[2] Language select setting: [Japanese; English]
[3] IP address setting: [IP address; Subnetmask; Gateway
address; Line speed]
[2] Copier initial setting Copy mode: [RADF; 1-1; 1-2; 2-1; 2-2]
Copy density: [AES; manual]
Lens mode: [AMS; ratio 0.33~4.00]
Paper size: [APS; trays 1, 2, 3, 4, or Multi-sheet bypass tray]
Output: [Output appli.; Staple-sort; Sort]
Function: [Special original; Rotation off]
[3] User setting mode [1] User density level 1 setting: [darker / lighter 16 levels]
[2] User density level 2 setting: [darker / lighter 16 levels]
[3] User lens mode ratio setting: [Userset 1; Userset 2; Userset
3 (ratio 0.33 ~ 4.00)]
[4] E.C.M. Function [1] E.C.M. data edit: [Change; Add; Delete]
setting [2] E.C.M. all count reset: [YES; NO]
[3] E.C.M. function setting: [ECM On; ECM Off; Immediately;
After job; Warning]
[5] Lock/delete job memory
[6] Paper type / Paper type: [Blank; Normal; Thick 1; Thick 2; Recycle; Thin;
Special Size Set Color; TAB; Special; User; Fine; Seal]
Special size: [STD size; STD size (special); Non STD size;
Wide size paper]
[7] Panel contrast / [Panel contrast; Backlight contrast; Buzzer volume regulation]
Key Sound Adj.
[8] Key operator [Name; Key Operator Tel. No.]
data setting
[9] Weekly timer [1] Weekly timer ON/OFF setting: [On; Off]
[2] Timer setting: [ON time; OFF time]
[3] Timer action ON/OFF setting: [ON; OFF]
[4] Lunch hour Off setting: [Valid; Invalid]
[5] Timer interrupt password setting: [4-digit password]
[10] Control panel adjustment
[11] Tray size setting ATS/APS switch: [ON; OFF]
Tray priority: [Tray 1, Tray 2, Tray 3, LCT, Bypass]