beautypg.com

Job store (continued) – Kyocera copier User Manual

Page 188

background image

Job Memory 10-3

Job Memory

Job Store (continued)

1 Make job selections from the Basic Screen, Application Selection Screen, Special

Original Screen and/or Output Selection Screen.

2 When all selections are made, press [

JOB MEMORY

] on the Control panel to display

the Job No. Selection Screen.

3 Touch

STORE

. The Job Store Check Screen displays to enable you to review the

settings. (See sample Job Store Check Screen, previous page.)

4 If settings are correct, touch

OK

to restore the Job No. Selection Screen.

Otherwise, touch

CANCEL

to return to the Basic Screen, and make new selections.

5 When the Job No. Selection Screen is restored, touch one of the keys numbered from

1~30 to store the job under that number. The key with a lock icon ( ) displayed is
locked and cannot be selected. Arrow keys can be used to scroll to the next/previous
page. The selected number key will be highlighted.

6 Touch

OK

on the Job No. Selection Screen to display the Job Name Registration

Screen.
If you do not wish to enter a name, touch

OK

.

The key displays [

✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽

] in place of a name.

7 Enter a job name in up to 16 characters, using the touch screen alphabet keypad.

To correct an entry, touch

DELETE

repeatedly to delete each character entered, then

enter the correct job name.

8 If the Job name is correct, touch

OK

to resume the Job No. Selection Screen.

To re-enter the Job name, touch

CANCEL

to return to the Job Name Registration

Screen.

9 When the Job No. Selection Screen is displayed, touch

OK

to complete the setting and

return to the Basic Screen.
To exit from the Job Memory setting anytime, press [

AUTO RESET

].

NOTES:
1 A locked job is indicated by a lock icon on the Job key number.
2 Only the key operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the key operator.
4 A blank key indicates that no job is stored under that key.
5 [

✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽

] displayed on a Job number key indicates that a job is stored but unnamed.

6 Job Memory entries can be recorded on the Job Memory Form included at the end of this section.