Kenwood XV-2020 - Manual (Page 90)

90
Using the XV-2020 Effects
33: ENHANCER -> FLANGER
fig.02-033m
34: ENHANCER -> DELAY
fig.02-034m
35: CHORUS -> DELAY
fig.02-035m
36: FLANGER -> DELAY
fig.02-036m
Parameter Value Description
Enhancer Sens # 0-127 Sensitivity of the enhancer
Enhancer Mix 0-127 Level of the overtones generated
by the enhancer
Flg Rate 0.05-10.00 Hz Frequency of modulation
Flg Depth 0-127 Depth of modulation
Flg Feedback -98-+98 % Adjusts the amount of the
flanger sound that’s fed back
into the effect. Negative (-) set-
tings invert the phase.
Flg Delay 0.0-100.0 ms Adjusts the time until the flanger
is heard.
Flg Balance # D100:0W-
D0:100W Adjusts the volume balance be-
tween the sound sent through
the flanger (W) and the sound
that’s not sent through the
flanger (D).
Level 0-127 Output level
Parameter Value Description
Enhancer Sens # 0-127 Sensitivity of the enhancer
Enhancer Mix 0-127 Level of the overtones generat-
ed by the enhancer
Delay Time 0.0-500.0 ms Adjusts the time until the delay
is heard.
Dly Feedback -98-+98 % Adjusts the amount of the de-
lay sound that’s fed back into
the effect. Negative (-) settings
will invert the phase.
Dly HF Damp 200-8000 Hz,
BYPASS Adjusts the frequency above
which sound fed back to the ef-
fect is filtered out. If you don’t
want to filter out any high fre-
quencies, set this parameter to
BYPASS.
Dly Balance # D100:0W-
D0:100W Adjusts the volume balance be-
tween the sound sent through
the delay (W) and the sound
that’s not sent through the de-
lay (D).
Level 0-127 Output level
Feedback
Flanger
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Feedback
Delay
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Parameter Value Description
Cho Rate 0.05-10.00 Hz Frequency of modulation
Cho Depth 0-127 Depth of modulation
Cho Delay 0.0-100.0 ms Adjusts the time until the cho-
rus is heard.
Cho Balance # D100:0W-
D0:100W Volume balance between the
direct sound (D) and the cho-
rus sound (W)
Delay Time 0.0-500.0 ms Adjusts the time until the delay
is heard.
Dly Feedback -98-+98 % Adjusts the amount of the de-
lay sound that’s fed back into
the effect. Negative (-) settings
invert the phase.
Dly HF Damp 200-8000 Hz,
BYPASS Adjusts the frequency above
which sound fed back to the ef-
fect is filtered out. If you do not
want to filter out any the high
frequencies, set this parameter
to BYPASS.
Dly Balance # D100:0W-
D0:100W Adjusts the volume balance be-
tween the sound sent through
the delay (W) and the sound
that’s not sent through the de-
lay (D).
Level 0-127 Output level
Parameter Value Description
Flg Rate 0.05-10.00 Hz Frequency of modulation
Flg Depth 0-127 Depth of modulation
Flg Feedback -98-+98 % Adjusts the amount of the flanger
sound that’s fed back into the ef-
fect. Negative (-) settings invert the
phase.
Flg Delay 0.0-100.0 ms Adjusts the time until the flanger is
heard.
Flg Balance # D100:0W-
D0:100W Volume balance between the direct
sound (D) and the flanger sound
(W)
Delay Time 0.0-500.0 ms Adjusts the time until the delay
sound is heard.
Dly Feedback -98-+98 % Adjusts the amount of the delay
sound that’s fed back into the ef-
fect. Negative (-) settings invert the
phase.
Dly HF Damp 200-8000 Hz,
BYPASS Adjusts the frequency above
which sound fed back to the effect
is filtered out. If you do not want to
filter out any high frequencies, set
this parameter to BYPASS.
Dly Balance # D100:0W-
D0:100W Adjusts the volume balance be-
tween the sound sent through the
delay (W) and the sound that’s not
sent through the delay (D).
Level 0-127 Output level
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Chorus
Balance W
Balance W
Balance D
Balance D
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Flanger
Balance W
Balance W
Balance D
Balance D
Feedback