Kenwood XV-2020 - Manual (Page 10)

10
Getting Ready to Play
Attaching the Rubber Feet
If you will not be using the separately available RAD-50 rack-mount adaptor, attach
the rubber feet that were supplied with the XV-2020, as shown in the figure. Use the
small holes on the bottom as a guide for positioning the rubber feet when attaching
them.
fig.00-03e
Installing on the Rack-Mount Adaptor
When installing on the rack-mount adaptor (RAD-50; sold separately), use the screw
(M4 x 8) included with the rack-mount adaptor.
fig.00-04e
OU T
IN
MID I
AC IN 1 2V 50 0m A
US E B OS S B RA
AD AP TO R O NLY
JV-1 010
TH RU
affix the supplied rubber feet onto the bottom of the unit
Screw (M4 x 8)
When mounting the unit
using the rack-mount
adaptor, install it onto the
rack-mount adaptor
without attaching the
rubber feet.