beautypg.com

P. 87), Triple tap delay, Quadruple tap delay – Kenwood XV-2020 User Manual

Page 87: Time control delay, 2 voice pitch shifter

background image

87

Using the XV-2020 Effects

Using the XV-2020

Effects

19: TRIPLE TAP DELAY

Produces three delay sounds; center, left and right.

fig.02-019m

20: QUADRUPLE TAP DELAY

This effect has four delays.

fig.02-020am

fig.02-020bm

Stereo location of each delay

21: TIME CONTROL DELAY

This effect allows you to use a specified controller — the controller
selected in EFX Control Source — to control the delay time and pitch
in realtime. Lengthening the delay lowers the pitch, and shortening
it raises the pitch.

fig.02-021m

22: 2 VOICE PITCH SHIFTER

Shifts the pitch of the original sound. This 2-voice pitch shifter has
two pitch shifters, and can add two pitch-shifted versions of the
original sound.

fig.02-022m

Parameter

Value

Description

Delay C

200-1000
ms, note *1

Adjusts the time until the delay sound is
heard.

Delay L
Delay R
Feedback #

-98-+98 %

Adjusts the amount of the delay sound that’s
fed back into the effect. Negative (-) settings
invert the phase.

HF Damp

200-8000
Hz, BYPASS

Adjusts the frequency above which sound
fed back to the effect is filtered out. If you do
not want to filter out any high frequencies,
set this parameter to BYPASS.

Delay C Level

0-127

Volume of each delay

Delay L Level
Delay R Level
Low Gain

-15-+15 dB

Gain of the low frequency range

High Gain

-15-+15 dB

Gain of the high frequency range

Balance #

D100:0W-
D0:100W

Volume balance between the direct sound
(D) and the delay sound (W)

Level

0-127

Output level

Parameter

Value

Description

Delay 1

200-1000
ms, note *1

Adjusts the time until the delay sound is
heard.

Delay 2
Delay 3
Delay 4
Feedback #

-98-+98 %

Adjusts the amount of the delay sound that’s
fed back into the effect. Negative (-) settings
invert the phase.

HF Damp

200-8000
Hz, BYPASS

Adjusts the frequency above which sound
fed back to the effect is filtered out. If you do
not want to filter out any high frequencies,
set this parameter to BYPASS.

Delay Level 1

0-127

Volume of each delay

Delay Level 2
Delay Level 3
Delay Level 4
Balance #

D100:0W-
D0:100W

Volume balance between the direct sound
(D) and the delay sound (W)

Level

0-127

Output level

L in

R in

L out

R out

Left Tap

Right Tap

Triple Tap Delay

2-Band

EQ

2-Band

EQ

Balance W

Balance D

Balance W

Balance D

Feedback

Center Tap

L in

R in

L out

R out

Quadruple Tap Delay

Balance W

Balance D

Balance W

Balance D

Delay 1

Delay 2

Delay 3

Delay 4

Feedback

1

2

3

4

L

R

Parameter

Value

Description

Delay #

200-1000 ms

Adjusts the time until the delay is heard.

Acceleration

0-15

Adjusts the time over which the Delay
Time changes from the current setting to
a specified new setting.

The rate of change for the Delay Time
directly affects the rate of pitch change.

Feedback #

-98-+98 %

Adjusts the amount of the delay that’s
fed back into the effect. Negative (-) set-
tings invert the phase.

HF Damp

200-8000 Hz,
BYPASS

Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you do not want to filter out any
high frequencies, set this parameter to
BYPASS.

Low Gain

-15-+15 dB

Gain of the low frequency range

High Gain

-15-+15 dB

Gain of the high frequency range

Balance

D100:0W-
D0:100W

Volume balance between the direct
sound (D) and the delay sound (W)

Level

0-127

Output level

Pan

L64-63R

Stereo location of the delay

Parameter

Value

Description

Coarse A #1

-24-+12 semi

Adjusts the pitch of Pitch Shift A in
semitone steps.

Fine A #1

-100-+100 cent

Adjusts the pitch of Pitch Shift A in 2-
cent steps.

Pre Dly A

0.0-500 ms

Adjusts the time until Pitch Shift A is
heard.

Pan A

L64-63R

Stereo location of Pitch Shift A

Coarse B #2

-24-+12 semi

Settings for Pitch Shift B

The parameters are the same as for
Pitch Shift A.

Fine B #2

-100-+100 cent

Pre Dly B

0.0-500.0 ms

Pan B

L64-63R

Mode

1, 2, 3, 4, 5

Setting a higher value for this parame-
ter results in a slower response, but
steadier pitch.

Level Bal

A100:0B-
A0:100B

Volume balance between Pitch Shift A
and Pitch Shift B

Balance

D100:0W-
D0:100W

Volume balance between the direct
sound (D) and the pitch shifted sound
(W)

Level

0-127

Output level

L in

R in

L out

R out

2-Band

EQ

Balance W

Balance W

Balance D

Balance D

2-Band

EQ

Feedback

Time Control Delay

L in

R in

L out

R out

2Voice Pitch Shifter

Level Balance A

Balance W

Balance D

Balance W

Balance D

Level Balance B

PanB R

PanA L

PanA R

PanB L