Kenwood XV-2020 User Manual

Page 103

103

Examples of Applications Using the XV-2020

Examples of Applications

Using the XV-2020

Click [DETAIL] for SYSTEM COMMON, then set [CLOCK

SOURCE] to [INT].

fig.08-08a.eps_50

fig.08-08b

When the System Clock Source parameter is set to MIDI or USB, you
can synchronize the LFO cycle to an external device.

When [TEMPO] (System Tempo) changes, the speed of the

phrase loop changes along with it.

The phrase loop sounds at the system’s tempo regardless of which key
you press. The settings for pitch and FXM are ignored.

Using a Pedal Switch to Change the
Rotary Speed of the Rotary Effect

Connect a pedal switch (DP-2, DP-6, etc.) to your external

MIDI controller (MIDI keyboard, etc.).

Set the pedal switch of the external MIDI controller to

generate FOOT TYPE (CC04) control-change messages.

To learn how to set up the pedal switch, refer to the external MIDI
controller’s owner’s manual.

Click the

for [PATCH NAME] and select a Patch that

uses ROTARY as the Multi-Effect.

Click [PARAM] for [MFX].

fig.08-03.eps_50

Set CONTROL SOURCE 1 to CC04.

Set DESTINATION 1 to SPEED, and SENS 1 to +63.

fig.08-19.eps_44

When you wish to speed up the rotary effect, press the

pedal switch. Release the pedal switch to slow down the

rotary effect.

Changing Part Settings from
an External MIDI Device

By sending Control Change messages for different Part settings,
including volume, panning, and pitch, you can change these settings
remotely from an external MIDI device connected to the XV-2020.
This lets you control fade-ins and fade-outs, open and close filters,
and exercise other controls in real time from the external MIDI
device.

The parameters that can be used for changing the settings, and the
Control Change messages that can be used to change the values, are
shown below.

For more detailed information about Control Change messages, please
refer to “MIDI Implementation” p. 136).

To change multi-effects, reverb, or chorus effects from an external
MIDI device, send a “System Exclusive message” (p. 140).

Remotely Controlling Volume (p. 136)

• Volume: Controller number 7

Remotely Controlling Stereo Positioning (p. 136)

• Panpot: Controller number 10

Remotely Applying Portamento (p. 136, p. 137)

• Portamento: Controller number 65 (Portamento switch),

Controller number 5 (Portamento time)

Remotely Changing Sounds’ Attack and Release
Time (p. 137)

• Release Time: Controller number 72