Sharp UP-600 - Manual (Page 191)

191
Key Data Entry Job Table Programming
Use the following procedure to select the menu option “22 CAPTURE JOB#” :
Capture job number
You can program a max. of 99 capture job numbers.
Program the item as follows:
• CAPTURE JOB# (Use the selective entry)
Select the pertinent capture Job number. (1 to 99)
• MESSAGE (Use the character entry)
Description for the job (display message). Up to 12
characters can be entered.
(for job#1 thru 4)
• ENTRY#1 thru 4 (Use the selective entry)
Data entry type
NUMERIC:
Numeric data type
CHARACTER: Character data type
INHIBIT:
Data entry is inhibited.
• MAX. LENGTH#1 thru 4 (Use the numeric entry)
Max. length of data entry (0 to 13)
“0” means the ENTER key entry only.
• MIN. LENGTH#1 thru 4 (Use the numeric entry)
Min. length of data entry (0 to 13)
• TEXT PRINT#1 thru 4 (Use the selective entry)
YES: Prints the entry data on R/J or Bill printer.
NO:
Does not print the entry data.
NOTE
• If the
DEL
key is pressed on the job number selection menu, the
selected job table will be deleted.
Select a pertinent
job number.
ENTER
The screen continues.