Sharp UP-600 - Manual (Page 171)

171
Zero skip
You can program whether or not to skip “0” sales totalizer in each report.
Program each item as follows:
• SERVER (Use the selective entry)
NOT SKIP: Does not skip those data that are “0” sales in
the server report.
SKIP: Skips those data that are “0” sales in the server
report.
• TRANSACTION (Use the selective entry)
NOT SKIP: Does not skip those data that are “0” sales in
the transaction report.
SKIP: Skips those data that are “0” sales in the
transaction report.
• DEPARTMENT (Use the selective entry)
NOT SKIP: Does not skip those data that are “0” sales in
the department report.
SKIP: Skips those data that are “0” sales in the
department report.
• PLU/UPC (Use the selective entry)
NOT SKIP: Does not skip those data that are “0” sales in
the PLU/UPC report.
SKIP: Skips those data that are “0” sales in the PLU/
UPC report.
• HOURLY (Use the selective entry)
NOT SKIP: Does not skip those data that are “0” sales in
the hourly report.
SKIP: Skips those data that are “0” sales in the hourly
report.
• DAILY NET (Use the selective entry)
NOT SKIP: Does not skip those data that are “0” sales in
the daily net report.
SKIP: Skips those data that are “0” sales in the daily
net report.
Hourly report
You can program the memory type and the starting time for the hourly report.
Program each item as follows:
• MEMORY TYPE (Use the selective entry)
15MIN: Selects the 15-minute type.
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
• STARTING TIME (Use the numeric entry)
Starting time entry (max. 2 digits: 0 to 23)