Sharp UP-600 - Manual (Page 13)

13
REG
OP X / Z MGR
X
1
/Z
1
X 2 /Z 2
PGM
1
PGM 2
OP
MA
SM
Operative range
OFF
MA SM
OP
• Manager key (MA) • Submanager key (SM)
• Operator key (OP)
Keys and Switches
Mode switch and mode keys
The mode switch can be operated by inserting one of the three supplied mode keys - manager (MA),
submanager (SM), and operator (OP) keys. These keys can be inserted or removed only when the switch is
in the “REG” or “OFF” position.
The mode switch has these settings:
OFF:
This mode locks all register operations.
No change occurs to existing data.
OP X/Z:
This setting allows cashiers/servers to take X or Z reports for
their sales information. (This setting may be used only when
your register has been programmed for “OP X/Z mode available”
in the PGM2 mode.)
REG: For entering sales
PGM1:
To program those items that need to be changed often: e.g., unit prices of departments, PLUs or
UPCs, and percentages
PGM2:
To program all PGM1 items and those items that do not require frequent changes: e.g., date time.
MGR:
For manager's and submanager's entries
The manager can use this mode to make entries that are not permitted to be made by cashiers/
servers - for example, after-transaction voiding and override entries.
X1/Z1:
To take the X/Z report for various daily totals
X2/Z2:
To take the X/Z report for various periodic (weekly or monthly) consolidation of totals.
Drawer lock key
This key locks and unlocks the drawer. To lock it, turn 90 degrees
counterclockwise. To unlock it, turn 90 degrees clockwise.
This same key is also used to open the cash drawer.
(Please refer to “15. Operator Maintenance — Operating the Drawer by
Hand”.)
Printer cover lock key
This key locks and unlocks the printer cover. To lock it, turn 90 degrees
counterclockwise. To unlock, turn 90 degrees clockwise.
SK1-2