Sharp UP-600 - Manual (Page 137)

137
Charge keys (continued)
• NEG # CHECK (Use the selective entry)
YES: Enables the negative # check function.
Any code (non-add code) existing in the negative # file is treated as invalid. The negative #
check function can be overridden depending upon the programming.
NO: Disables the negative # check function.
• POSITIVE # (Use the selective entry)
YES: Enables the positive # check function.
Any code (non-add code) existing in the positive # file is treated as valid.
NO: Disables the positive # check function.
• CHANGE DUE (Use the selective entry)
Either change enable or disable can be selected for each check key.
DISABLE: Disables change calculation.
ENABLE: Enables change calculation.
• VP (Use the selective entry)
COMPUL.: Compulsory validation printing
NON-COMPUL.: Non-compulsory validation printing
• GAS DISCOUNT (Use the selective entry)
YES: Enables gas discount.
NO:
Disables gas discount.
• TAX1 thru 4 DELETE (Use the selective entry)
You can program each check key to delete tax (i.e. tax 1, tax 2, tax 3, and tax 4) when it is pressed.
YES: Deletes Tax n (1 thru 4).
NO:
Calculates Tax n (1 thru 4).
• DRAWER OPENING (Use the selective entry)
NO: Disables the drawer opening.
YES: Opens the drawer.
• AMOUNT (Use the selective entry)
COMPUL.: Compulsory amount tendered entry
INHIBIT:
Inhibit amount tendered entry
• OUTPUT KP No.1 thru 3 (Use the numeric entry)
ID number of the remote printer 1, 2 or 3 (1 digit: 1 to 9)
If the number “0” is entered, no items will be sent to the remote printer.
• CHIT RECEIPT (Use the selective entry)
YES: Prints on the chit receipt in the remote printer format.
NO:
Prints nothing on the chit receipt.
• DATA ENT. JOB# (Use the numeric entry)
Key data entry job no. (Capture job no.: 0 thru 99)
When “0” is programmed, the data capture entry is inhibited.