Sharp UP-600 - Manual (Page 103)

103
• ENTRY TYPE (Use the selective entry)
Mode parameter
OPEN & PRESET: Open price and preset price
PRESET:
Preset price only
OPEN: Open price only
INHIBIT: Inhibited
NOTE
For UPC, it is fixed to “PRESET”.
• BASE Q’TY (Use the numeric entry)
Base quantity for each PLU/UPC which is counted each time
the item is entered. (max. 2 digits)
• MIN. STOCK (Use the numeric entry)
Minimum stock quantity for a PLU (max. 7 digits)
• PRICE SHIFT (Use the selective entry)
COMPUL.: Makes PLU/UPC price level shift compulsory.
INHIBIT:
Inhibits PLU/UPC price level shift.
ENABLE: Enables PLU/UPC price level shift.
NOTE
When “COMPULSORY” is selected for a PLU/UPC, repeat
entries of the PLU/UPC are inhibited.
• *ZERO OF P1 thru 6 (Use the selective entry)
ALLOWED: Allows a zero-price entry.
INHIBIT:
Inhibits a zero-price entry.
• CP OBJECT (Use the numeric entry)
Select an object PLU code (max. 5 digits).
A coupon-like PLU is able to link to another PLU (object
PLU).
By this programming, the associated coupon PLU cannot be
entered unless the object PLU has been rung up.
(However, the quantity is not affected.)
NOTE
• Any object PLU should not be programmed as a minus PLU or
belong to any minus department.
• MENU TYPE (Use the selective entry)
PLU menu type selection
LINK:
Link PLU/UPC
NORMAL: Normal PLU/UPC
• LINK TBL# (Use the numeric entry)
Table number for link PLUs (1 thru 99)
• MIX&MATCH TBL# (Use the numeric entry)
Table number for mix and match (1 thru 99)
• CONDIMENT TBL# (Use the numeric entry)
Table number for condiment entry (1 thru 99)
NOTE
For UPC, it is fixed to “00”.
PLU/UPC (continued)