Machine number, Consecutive number, Interval timer – Sharp UP-600 User Manual
Page 157
157
Machine number
When your store has two or more POS terminals, it is practical to assign them unique machine numbers for
their identification.
Program the item as follows:
• MACHINE# (Use the numeric entry)
Machine number (max. 6 digits: 0 to 999999)
Consecutive number
The consecutive number is increased by one each time a receipt is issued.
Program the item as follows:
• CONSECUTIVE# (Use the numeric entry)
Enter a number (max. 4 digits: 0 to 9999) that is one less
than the desired starting number.
Interval timer
You can program the timer for THE TILL TIMER
TM
and the screen save mode timer.
Program each item as follows:
• TILL TIMER (Use the numeric entry)
The POS terminal counts the number of times the drawer is
left open for longer than a programmed time limit. The
counter will be incremented by one each time a programmed
time limit is reached. The time limit for THE TILL TIMER
TM
can be preset for 0 to 255 seconds. The count is printed on
the transaction report and server report. If the number “0” is
entered, this function is unavailable.
• SCREEN SAVE (Use the numeric entry)
Screen save mode timer (max. 2 digits: 0 to 99 minutes)
If the number “0” is entered, the POS terminal will turn the
display off after 100 min., if the POS terminal remains idle.