Siemens 2060isdn - Manual (Page 98)

Glossary
98
I_KAP08.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Glossary
Access rights By setting access rights you determine whether your tele-
phone can be used
● for outgoing and incoming external and internal calls
(full trunk access rights),
● for incoming external calls and internal calls only (in-
coming-only access rights),
● for internal calls only (internal-only access rights).
ADPCM Adaptive Delta Pulse Code Modulation
Digital transmission procedure; an analog signal is
mapped in digital values and the difference between
these values is transmitted.
Automatic call back (feature with point-to-multipoint access)
If the party you attempt to call is busy you can activate au-
tomatic callback so that you will be called as soon as the
line is free.
Call-charge information/
call-data information
(feature common to all types of access)
● During a call in progress and following connection
cleardown
● When the connection is cleared down
Call forwarding (feature common to all types of access)
● Immediate call forwarding (direct)
● Timeout call forwarding (15 seconds delay). You have
time to decide whether to answer the call or let it be
forwarded automatically after 15 seconds,
● Call forwarding on busy
Call waiting (point-to-multipoint access feature)
The call-waiting tone draws your attention to an incoming
call while you are conducting a call. The calling party’s
phone number may be displayed.
You have the choice of answering or rejecting the second
call. If you reject it the caller hears the busy tone.
Consultation call (feature with point-to-multipoint access)
You can interrupt a call in progress (the connection is not
cleared down) and make another call, for example to con-
sult with a colleague. You then resume the interrupted
first call.
CTR Common Technical Regulation; European certification
regulation
DDI Direct dialing in; system with extension numbers for ISDN
point-to-point access
DECT Digital European Cordless Telephone standard