Siemens 2060isdn - Manual (Page 88)

Operation behind a private branch exchange
88
I_KAP05.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Operation behind a private branch exchange
General remarks
You can connect your Gigaset 2060isdn to and operate it
via private branch exchanges connecting to Euro-ISDN ac-
cesses with DSS1 protocol.
As a rule, point-to-multipoint is the access mode of pref-
erence at the subscriber accesses of the private branch
exchanges.
You should ascertain which PBX-specific features and
ISDN services are available at the subscriber circuits of
the private branch exchange before you use the Gigaset
2060isdn.
Activating PBX features
Your Gigaset 2060isdn can utilize the scope of features of-
fered by the higher-order PBX. The features you can use
include consultation, call switching, toggling, three-way
conferencing, call forwarding, automatic callback and so
on. Always consult the operating instructions for the high-
er-order PBX.
Example: setting up a consultation call
You can set up a consultation call to a PBX user while con-
ducting a call. See the operating instructions for the PBX.
t Meaning: see footnote
Terminate the consultation call
t Meaning: see footnote
Press this key to terminate the consultation call and re-
sume the call with the external user.
or switch the call
• You are conducting an external call.
.t Ext. consultat’n or R Press to initiate the external consultation call.
o
Enter the phone number of the extension you want to
call, for example 1 2 3 4 5. Conduct your consultation call.
.t Resume
a Press the on-hook key or return the mobile unit to the
charging unit.
t means: browse withu or u and press x to confirm Z NEXT OK