Siemens 2060isdn User Manual

Page 24

Basic settings

I_KAP03.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

Setting point-to-point

You can use this mode with your Gigaset 2060isdn, but

you must obtain the point-to-point access from your net-

work provider, who also provides the requisite network

terminator.

When configured in this way your Gigaset 2060isdn is

compatible only with a point-to-point access installed by

your network provider.

Meaning: see footnote

After confirming - and thus activating - “Point to P.”, select:

Use the

softkey to check the entries and the

softkey to save the new entry or change.

The comfort mobile unit is idle. You will be prompted to

enter the system code in the course of this procedure

(default code: “0000”).

.t Service

t System settings t Configuration

t Point to P.

t P/P phonenumber

Enter the full point-to-point phone number:

International code

(e. g. 0044 for UK),

followed by the local code (e.g. 171 for London)

and the phone number you received from your network

provider.

The phone number cannot be more than 10 dig-

its in length.
If you change to point-to-point you must re--ini-

tialize the base station by unplugging the AC

adapter from the mains socket and then recon-

necting to the power supply. For more details on

point-to-point operation, ➔ page 17 and ➔ page

81.

SAVE

t means: browse withu

and

press x

to confirm

NEXT