Siemens 2060isdn - Manual (Page 27)

Basic settings
27
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Administrating the list of calls
Calls which do not complete (no connection because
busy, no answer) are automatically logged in a list of calls.
The list contains up to 10 entries with phone numbers (no
repeats) of calls switched via the ISDN exchange.
Activating/deactivating display
You can activate or deactivate display of the list. Display is
activated by default.
t Meaning: see footnote
Deleting numbers from the list of calls
You can delete individual numbers or the entire list.
To delete individual numbers from the list
To delete the entire list
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t Disp. call list
x
Press OK if you merely want to check the setting.
u
Press to activate display.
u Press to deactivate display.
OK
ON
OFF
c Press the off-hook key
.t Set sys funct.
t List of calls t Delete entry
u x
Select and delete the entry of your choice.
NEXT DELETE
c Press the off-hook key
.t Set sys funct.
t List of calls t Delete all
u
Press “YES” to confirm and delete all entries in the list of
calls.
YES
The “List of calls” is one of the items available
in the “Service” menu when the mobile unit is
idle.
A phone number is automatically deleted from
the list when the connection is set up.
t means: browse withu or u and press x to confirm Z NEXT OK