Siemens 2060isdn - Manual (Page 57)

System settings
57
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Setting/changing ring allocation for point-to-multipoint access
If you have a point-to-multipoint access, you have to save
external phone numbers (multiple subscribe numbers,
MSNs, ➔ page 14) before you proceed to ring allocation.
If your configuration incorporates more than 6 cordless
users, the phone number is not displayed on the called
party’s telephone if the calling party is cordless user 6, 7
or 8 as defined by the order in which the cordless users
were registered.
t Meaning: see footnote
This is the menu for setting ring allocation. The current
setting is marked “active”. The options at your disposal are
as follows:
Example:
When an external call is incoming for MSN 12345678, the
users with internal numbers 2, 3 and 5 are called simulta-
neously.
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Line data
t MSN n Select the multiple subscriber number for which you want
to set ring allocation, for example MSN 1.
t Ring allocation
t Coll. call Enter/change collective call
The collective call list is displayed if you select “collective
call”.
External phone No. Corresponding internal
users
12345678 2, 3, 5
t Group call Enter/change group calls
The call list of group 1 is displayed, followed by that of
group 2, if you select “group call”.
t means: browse withu or u and press x to confirm Z NEXT OK