Siemens 2060isdn User Manual

Page 55

System settings

I_KAP03.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

Reinitializing the base station

You can reinitialize the base station - restore default set-

tings, in other words - for example if you are no longer

sure precisely which changes have been made. For the

sake of simplicity, however, not all system parameters are

reset when you reinitialize. The effects are as follows:

Meaning: see footnote

The message “Initialisation completed” is displayed for 2

seconds when you confirm your choice.

Ring allocation for point-to-multipoint access

By setting ring allocation you determine:
1. The mobile units and devices and their multiple sub-

scriber number (external phone number) at which an

external call will be signaled.

2. The multiple subscriber number (external phone num-

ber) under which you conduct an outgoing external

call (important for call data recording and phone num-

ber display).

Ring allocation enables you to assign one or more internal

numbers to a multiple subscriber number. Conversely,

one or more multiple subscriber numbers can be as-

signed to an internal number.

If you have assigned multiple external phone numbers to

an internal user (for example for receiving business calls

and private calls), the first external phone number in the

list is the one used by call data recording for outgoing

calls.

You define ring allocation by entering the internal number

in the list of the collective call group or the group lists for

extended ring no answer.

Reset

Deleted

Not changed

Settings

Configuration

Units/charges accrued

Emergency phone numbers

Lock numbers for call barring

Point-to multipoint/point num-

bers

System code

Mobile unit registrations

Ring allocation

The comfort mobile unit is idle. You will be prompted to

enter the system code in the course of this procedure

(default code: “0000”).

.t Service

t System settings t Initialization

t means: browse withu

and

press x

to confirm

NEXT